Estudio del mejoramiento de las propiedades mecanicas en un acero de bajo contenido de carbono ASTM 615a grado 60 por efecto de la formacion de martensita revenida

Hugo Anchapuri; Jonathan Almirón; Jose Mamani-Quispe; Rossibel Churata; Jeniffer Torres-Almirón; Danny Tupayachy-Quispe

Estudio del mejoramiento de las propiedades mecanicas en un acero de bajo contenido de carbono ASTM 615a grado 60 por efecto de la formacion de martensita revenida

Hugo Anchapuri, Jonathan Almirón, Jose Mamani-Quispe, Rossibel Churata, Jeniffer Torres-Almirón, Danny Tupayachy-Quispe

Escuela Profesional de Ingeniería Industrial

Universidad Nacional de San Agustín

Producción científica: Capítulo del libro/informe/acta de congreso › Contribución a la conferencia › revisión exhaustiva

Resumen

This research work consists of studying the improvement of mechanical properties through heat treatments, especially hardness and impact resistance in ASTM 615a grade 60 corrugated steel. 12 samples were prepared, one without treatment and the others with quenching and tempering heat treatments, different parameters such as austenitization temperature, tempering temperature and tempering time were evaluated. After evaluating the hardness and toughness, it was possible to improve the hardness in the 11 samples and the toughness was maintained at values close to the sample without treatment. In addition, a metallographic analysis and a microstructural analysis were made, where the presence of martensite could be observed, which is a mestastable phase of steels, the presence of martensite may be the cause of the increase in the hardness of the material. The quality of the steel obtained could be used as grinding balls in mineral concentrator machines due to its hardness.

Título traducido de la contribución	Study of the improvement of mechanical properties in a low carbon steel ASTM 615a grade 60 due to the formation of tempered martensite
Idioma original	Español
Título de la publicación alojada	Proceedings of the 21st LACCEI International Multi-Conference for Engineering, Education and Technology
Subtítulo de la publicación alojada	Leadership in Education and Innovation in Engineering in the Framework of Global Transformations: Integration and Alliances for Integral Development, LACCEI 2023
Editores	Maria M. Larrondo Petrie, Jose Texier, Rodolfo Andres Rivas Matta
Editorial	Latin American and Caribbean Consortium of Engineering Institutions
ISBN (versión digital)	9786289520743
Estado	Publicada - 2023
Evento	21st LACCEI International Multi-Conference for Engineering, Education and Technology, LACCEI 2023 - Buenos Aires, Argentina Duración: 19 jul. 2023 → 21 jul. 2023

Serie de la publicación

Nombre	Proceedings of the LACCEI international Multi-conference for Engineering, Education and Technology
Volumen	2023-July
ISSN (versión digital)	2414-6390

Conferencia

Conferencia	21st LACCEI International Multi-Conference for Engineering, Education and Technology, LACCEI 2023
País/Territorio	Argentina
Ciudad	Buenos Aires
Período	19/07/23 → 21/07/23

Palabras clave

Tempered martensite
hardness
impact
steel

Otros archivos y enlaces

Enlace a la publicación en Scopus

Citar esto

Anchapuri, H., Almirón, J., Mamani-Quispe, J., Churata, R., Torres-Almirón, J., & Tupayachy-Quispe, D. (2023). Estudio del mejoramiento de las propiedades mecanicas en un acero de bajo contenido de carbono ASTM 615a grado 60 por efecto de la formacion de martensita revenida. En M. M. Larrondo Petrie, J. Texier, & R. A. R. Matta (Eds.), Proceedings of the 21st LACCEI International Multi-Conference for Engineering, Education and Technology: Leadership in Education and Innovation in Engineering in the Framework of Global Transformations: Integration and Alliances for Integral Development, LACCEI 2023 (Proceedings of the LACCEI international Multi-conference for Engineering, Education and Technology; Vol. 2023-July). Latin American and Caribbean Consortium of Engineering Institutions.

Anchapuri, Hugo ; Almirón, Jonathan ; Mamani-Quispe, Jose et al. / Estudio del mejoramiento de las propiedades mecanicas en un acero de bajo contenido de carbono ASTM 615a grado 60 por efecto de la formacion de martensita revenida. Proceedings of the 21st LACCEI International Multi-Conference for Engineering, Education and Technology: Leadership in Education and Innovation in Engineering in the Framework of Global Transformations: Integration and Alliances for Integral Development, LACCEI 2023. editor / Maria M. Larrondo Petrie ; Jose Texier ; Rodolfo Andres Rivas Matta. Latin American and Caribbean Consortium of Engineering Institutions, 2023. (Proceedings of the LACCEI international Multi-conference for Engineering, Education and Technology).

@inproceedings{08d3587d4da34063b20d72f1aed2a2f4,

title = "Estudio del mejoramiento de las propiedades mecanicas en un acero de bajo contenido de carbono ASTM 615a grado 60 por efecto de la formacion de martensita revenida",

abstract = "This research work consists of studying the improvement of mechanical properties through heat treatments, especially hardness and impact resistance in ASTM 615a grade 60 corrugated steel. 12 samples were prepared, one without treatment and the others with quenching and tempering heat treatments, different parameters such as austenitization temperature, tempering temperature and tempering time were evaluated. After evaluating the hardness and toughness, it was possible to improve the hardness in the 11 samples and the toughness was maintained at values close to the sample without treatment. In addition, a metallographic analysis and a microstructural analysis were made, where the presence of martensite could be observed, which is a mestastable phase of steels, the presence of martensite may be the cause of the increase in the hardness of the material. The quality of the steel obtained could be used as grinding balls in mineral concentrator machines due to its hardness.",

keywords = "Tempered martensite, hardness, impact, steel",

author = "Hugo Anchapuri and Jonathan Almir{\'o}n and Jose Mamani-Quispe and Rossibel Churata and Jeniffer Torres-Almir{\'o}n and Danny Tupayachy-Quispe",

note = "Publisher Copyright: {\textcopyright} 2023 Latin American and Caribbean Consortium of Engineering Institutions. All rights reserved.; 21st LACCEI International Multi-Conference for Engineering, Education and Technology, LACCEI 2023 ; Conference date: 19-07-2023 Through 21-07-2023",

year = "2023",

language = "Espa{\~n}ol",

series = "Proceedings of the LACCEI international Multi-conference for Engineering, Education and Technology",

publisher = "Latin American and Caribbean Consortium of Engineering Institutions",

editor = "{Larrondo Petrie}, {Maria M.} and Jose Texier and Matta, {Rodolfo Andres Rivas}",

booktitle = "Proceedings of the 21st LACCEI International Multi-Conference for Engineering, Education and Technology",

}

Anchapuri, H, Almirón, J, Mamani-Quispe, J, Churata, R, Torres-Almirón, J & Tupayachy-Quispe, D 2023, Estudio del mejoramiento de las propiedades mecanicas en un acero de bajo contenido de carbono ASTM 615a grado 60 por efecto de la formacion de martensita revenida. En MM Larrondo Petrie, J Texier & RAR Matta (eds.), Proceedings of the 21st LACCEI International Multi-Conference for Engineering, Education and Technology: Leadership in Education and Innovation in Engineering in the Framework of Global Transformations: Integration and Alliances for Integral Development, LACCEI 2023. Proceedings of the LACCEI international Multi-conference for Engineering, Education and Technology, vol. 2023-July, Latin American and Caribbean Consortium of Engineering Institutions, 21st LACCEI International Multi-Conference for Engineering, Education and Technology, LACCEI 2023, Buenos Aires, Argentina, 19/07/23.

Estudio del mejoramiento de las propiedades mecanicas en un acero de bajo contenido de carbono ASTM 615a grado 60 por efecto de la formacion de martensita revenida. / Anchapuri, Hugo; Almirón, Jonathan; Mamani-Quispe, Jose et al.
Proceedings of the 21st LACCEI International Multi-Conference for Engineering, Education and Technology: Leadership in Education and Innovation in Engineering in the Framework of Global Transformations: Integration and Alliances for Integral Development, LACCEI 2023. ed. / Maria M. Larrondo Petrie; Jose Texier; Rodolfo Andres Rivas Matta. Latin American and Caribbean Consortium of Engineering Institutions, 2023. (Proceedings of the LACCEI international Multi-conference for Engineering, Education and Technology; Vol. 2023-July).

Producción científica: Capítulo del libro/informe/acta de congreso › Contribución a la conferencia › revisión exhaustiva

TY - GEN

T1 - Estudio del mejoramiento de las propiedades mecanicas en un acero de bajo contenido de carbono ASTM 615a grado 60 por efecto de la formacion de martensita revenida

AU - Anchapuri, Hugo

AU - Almirón, Jonathan

AU - Mamani-Quispe, Jose

AU - Churata, Rossibel

AU - Torres-Almirón, Jeniffer

AU - Tupayachy-Quispe, Danny

PY - 2023

Y1 - 2023

N2 - This research work consists of studying the improvement of mechanical properties through heat treatments, especially hardness and impact resistance in ASTM 615a grade 60 corrugated steel. 12 samples were prepared, one without treatment and the others with quenching and tempering heat treatments, different parameters such as austenitization temperature, tempering temperature and tempering time were evaluated. After evaluating the hardness and toughness, it was possible to improve the hardness in the 11 samples and the toughness was maintained at values close to the sample without treatment. In addition, a metallographic analysis and a microstructural analysis were made, where the presence of martensite could be observed, which is a mestastable phase of steels, the presence of martensite may be the cause of the increase in the hardness of the material. The quality of the steel obtained could be used as grinding balls in mineral concentrator machines due to its hardness.

AB - This research work consists of studying the improvement of mechanical properties through heat treatments, especially hardness and impact resistance in ASTM 615a grade 60 corrugated steel. 12 samples were prepared, one without treatment and the others with quenching and tempering heat treatments, different parameters such as austenitization temperature, tempering temperature and tempering time were evaluated. After evaluating the hardness and toughness, it was possible to improve the hardness in the 11 samples and the toughness was maintained at values close to the sample without treatment. In addition, a metallographic analysis and a microstructural analysis were made, where the presence of martensite could be observed, which is a mestastable phase of steels, the presence of martensite may be the cause of the increase in the hardness of the material. The quality of the steel obtained could be used as grinding balls in mineral concentrator machines due to its hardness.

KW - Tempered martensite

KW - hardness

KW - impact

KW - steel

UR - http://www.scopus.com/inward/record.url?scp=85172292213&partnerID=8YFLogxK

M3 - Contribución a la conferencia

AN - SCOPUS:85172292213

T3 - Proceedings of the LACCEI international Multi-conference for Engineering, Education and Technology

BT - Proceedings of the 21st LACCEI International Multi-Conference for Engineering, Education and Technology

A2 - Larrondo Petrie, Maria M.

A2 - Texier, Jose

A2 - Matta, Rodolfo Andres Rivas

PB - Latin American and Caribbean Consortium of Engineering Institutions

T2 - 21st LACCEI International Multi-Conference for Engineering, Education and Technology, LACCEI 2023

Y2 - 19 July 2023 through 21 July 2023

ER -

Anchapuri H, Almirón J, Mamani-Quispe J, Churata R, Torres-Almirón J, Tupayachy-Quispe D. Estudio del mejoramiento de las propiedades mecanicas en un acero de bajo contenido de carbono ASTM 615a grado 60 por efecto de la formacion de martensita revenida. En Larrondo Petrie MM, Texier J, Matta RAR, editores, Proceedings of the 21st LACCEI International Multi-Conference for Engineering, Education and Technology: Leadership in Education and Innovation in Engineering in the Framework of Global Transformations: Integration and Alliances for Integral Development, LACCEI 2023. Latin American and Caribbean Consortium of Engineering Institutions. 2023. (Proceedings of the LACCEI international Multi-conference for Engineering, Education and Technology).

Estudio del mejoramiento de las propiedades mecanicas en un acero de bajo contenido de carbono ASTM 615a grado 60 por efecto de la formacion de martensita revenida

Resumen

Serie de la publicación

Conferencia

Palabras clave

Otros archivos y enlaces

Huella

Citar esto